Door Pre-Assembly - Craftsman 65018 Assembly Instructions Manual

DOOR PRE-ASSEMBLY

1
B
A
N
B
2
At top interior side of left door, attach D-ring slide bolt
(E) with four screws (BB) through provided holes.
BB
x13
BB x4 x4
E
x4
Peel film from both sides of window (B).
Lay left door (N) on flat ground with window screw
attachments facing up. Place window gasket (A) into
door channel, then place window (B). Cut excess gasket
length. Through backside of door, secure layers with
thirteen screws (BB)—start with four corner screws and
then finish with remaining screws. DO NOT over tighten
screws. Repeat on right door (M). Note: The cut
portion of window gasket (A) MUST be assembled on
top of door channel.
3
At bottom interior side of left door, attach D-ring slide
bolt (E) with four screws (BB) through provided holes.
11
BB x4
E
x4