Honda Dream Neo Owner's Manual page 67

master link retaining clip (1) with a pair
of pliers. Do not bend or twist the clip.
Remove the master link. Remove the
drive chain from the vehicle.
2. Clean the drive chain in high flash-point
solvent and allow it to dry. Inspect the
damaged rollers, loose fitting links or
otherwise appears unserviceable.
3. Inspect the sprocket teeth for possible
wear or damage. Replace if necessary.
Never use a new drive chain on badly
worn sprockets.
sprockets must be in good condition, or
the new replacement chain or sprocket
will wear rapidly.
4. Lubricate the drive chain (page 58).
5. Pass the chain over the sprockets and
join the ends of the chain with the
master link. For ease of assembly,
hold the chain ends against adjacent
rear sprocket teeth while inserting the
master link.
The master link is the most critical part
affecting the security of the drive chain.
Honda Motorcycle & Scooter India Pvt. Ltd.
Both chain and
Master links are reusable, if they
remain in excellent condition, but it
is recommended that a new master link
retaining clip be installed whenever the
drive chain is reassembled.
Install the master link retaining clip so
that the closed end of the clip will face
the direction of forward wheel rotation.
6. Adjust the drive chain (page 56) and
rear brake pedal free play.
7. Install the drive chain cases.
¼fjVs f ua x fDyi½
(1) Retaining Clip
(1)
59