Starting Procedure; Cold Engine; Warm Engine - Honda Dream Neo Owner's Manual

Starting Procedure

Cold Engine:

1. Pull the choke lever (1) up all the way
to fully ON.
2. With the throttle slightly open, press
the start button.
(or use the kickstarter)
Lightly depress the kick-starter until
resistance is felt.
Then let the kick-starter return to top of
its stroke.
With the throttle slightly open, operate
the kick starter.
Kick from the top of the through to the
bottom with a rapid, continuous motion.
3. Immediately after the engine starts,
push the choke lever down to the
halfway position.
NOTICE
Extended use of the choke may impair
piston and cylinder wall lubrication and
damage the engine.
34
4. Warm up the engine by opening and
closing the throttle slightly.
5. Continue warming up the engine until
it runs smoothly and responds to the
throttle, when the choke lever is at fully
OFF.
(A)
(B)
¼pks d yhoj½
(1) Choke Lever
¼gkW Q vkW u ½
(B) Half ON

Warm Engine

(1) Do not use the choke.
(2) Start the engine following step 2 under
"Cold Engine".
Honda Motorcycle & Scooter India Pvt. Ltd.
(C)
¼iw . kZ r ;k vkW u ½
(A) Fully ON
¼iw . kZ r ;k vkW Q ½
(C) Fully OFF
(1)