Makita DPB181 Technical Information page 9

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Lever Shaft
DISASSEMBLING
(1) Disassemble Lever shaft as drawn in Fig. 10.
Fig. 10
1. Pull off Ring spring 12 from the machine,
and set Lever 54 to the release position.
Lever 54
4. Pull off Lever shaft.
Lever shaft
ASSEMBLING
(1) Set Compression spring 9 and Plane bearing 30 as drawn to the right illustration in Fig. 10.
(2) Mount Lever shaft to Frame as drawn in Fig. 11.
Fig. 11
Face the pin portion to the opposite side of
Compression spring 9, and mount Lever shaft.
Pin portion
2. Pull off Lever 54.
Ring spring 12
5. Remove Plane bearing 30 and
Compression spring 30.
Lever shaft
3. Remove Lever holder by unscrewing
four 4x18 Tapping screws.
Lever 54
Compression sprig 9
Compression spring 9
4x18 Tapping
screws
( 4 pcs. )
Plane bearing 30
P 9/ 18
Lever
holder