Honeywell Excel 800 SYSTEM Installation And Commissioning Instructions page 7

Excel 800
Auxiliary Parts
Module
Manual disconnect
modules
Auxiliary terminal
packages
Cross connectors,
short (yellow)
Table 5 Auxiliary parts
Spare Parts
Module
Cross connectors, long
(red)
Connector bridge
Swivel label holder
Swivel label holder
Table 6 Spare parts
Type Figure
XS812
XS812RO
XS814
XS830
A1 A2 A3 A4 A5 A6 A7 A8 A9
XS831
A1 B1 A2 B2 A3 B3 A4 B4 G1
XS817
Type Figure
XS815
XS816
XAL10
XAL11
Corresponding
I/O modules XF...
...821
...822
...823
...824
...825
For all pluggable Excel
800 I/O modules.
B1 B2 B3 B4 B5 B6 B7 B8 B9
XF830A and XFU830A,
only.
A5 B5 A6 B6 A7 B7 A8 B8 G2
...824
...825
Corresponding
I/O modules XF...
...824
...825
All Excel 800 I/O modules
For all pluggable Excel
800 I/O modules
XF830A and XFU830A,
only
7
System Overview
Information
Module allows disconnection
of individual I/O signals.
Module allows disconnection
of individual I/O signal. For
24 V applications, only.
Two groups of seven
internally-connected push-in
terminals, for distributing
signals/power (see also Fig.
95).
Two groups of nine internally-
connected push-in terminals,
for distributing signals/power
(see also Fig. 97).
Two groups of four pairs of
push-in terminals, for con-
verting 0...20 mA signals into
0...10 Vdc signals, and one
push-in ground terminal per
group (see also Fig. 99).
Connects three relay
commons, required in case of
line voltage and low voltage in
the same I/O module.
Information
Connects six relay commons.
Connects XCL8010 and I/O
modules.
Can be plugged into socket,
for attaching label generated
by CARE.
Can be plugged into module,
for attaching label generated
by CARE.
EN1B-0375GE51 R0910