Honeywell Excel 5000 Open System User Manual
Zapp handheld
Hide thumbs
Also See for Excel 5000 Open System:
- Installation instructions (4 pages) ,
- Installation and commissioning instructions (92 pages) ,
- Installation instructions manual (10 pages)
Related Manuals for Honeywell Excel 5000 Open System
Summary of Contents for Honeywell Excel 5000 Open System
- Page 1 ZAPP Handheld User Manual Copyright © 2000 Honeywell Inc. • All Rights Reserved EN2B-0205GE51 R0101...
- Page 3 Overview Overview For your information Technical terms are explained in the glossary (Page 12). They are identified in the text by an asterisk (*). Application The ZAPP handheld is used to send commands to the ZAPP receiver*. The ZAPP receiver* then forwards ®...
-
Page 4: Table Of Contents
Overview / Help with problems Contents Overview Adjust functions Child-proof lock Batteries Glossary Technical data Help with problems EN2B-0205... -
Page 5: Adjust Functions
Adjust functions Adjust functions Activation buttons With activation buttons you can choose functions. The activation buttons control following functions: occupancy override* setpoint offset* (tempera- ture) fanspeed sunblinds light switchgear* or second light officestyle* A officestyle* B Control buttons With the control buttons ▼, ▲, you can adjust the func- tions. - Page 6 Adjust functions / Help with problems Temperature Setpoint Offset* If you press the ▼ or ▲ control button briefly, you lower or increase the temperature setpoint offset* in steps of 0.5 °C. If you press it for longer, you lower or increase the temperature setpoint offset* by a maximum of 5 °C.
- Page 7 Adjust functions Fanspeed If you press the ▼ or ▲ control button briefly, you lower or increase the fanspeed to a setting of “off”, “one”, “two”, or “three”. If you press it for longer, you lower or increase the fanspeed to the maximum value (“off” or “three”). Lowering Press ►...
- Page 8 Adjust functions / Help with problems Sunblind If you press the ▼ or ▲ control button briefly, you automatically lower or lift the sunblind completely. If you press it for longer, you lower or lift the sunblind for as long as the button is pressed. It stops when you release the button.
- Page 9 Adjust functions Light With the upper activation button , you can control the light. Switching off Press ► Press ▼. ► The light is switched off. Switching on Press ► Press ▲. ► The light is switched on. Dimming Press ►...
- Page 10 Adjust functions / Help with problems Second light or switchgear* With the lower activation button , you can control a light or switchgear*. Switching off Press ► Press ▼. ► The light or switchgear* is switched off. Switching on Press ►...
- Page 11 Adjust functions Officestyle* Defining the settings Adjust sunblinds, fanspeed, lights, etc. ► Press A ► ► press Press ok for at least five seconds. ► The officestyle* is defined. Activating the defined settings Press A ► ► press B. Press ok briefly. ►...
-
Page 12: Child-Proof Lock
Child-proof lock / Help with problems Child-proof lock Locking Press any activation button and observe the LED*. ► If the LED* lights up green, the child-proof lock is not active. Simultaneously press the buttons ▲, ▼, and ok. ► The child-proof lock is now active. To test the child-proof lock, press any button. -
Page 13: Batteries
Batteries Batteries You should change both batteries and use only leak-proof batteries: • Micro-batteries*: Alkaline LR03 (service life: roughly two years) • Open compartment for batteries. ► Batteries may discharge. Make sure that each battery is inserted in the right ►... -
Page 14: Glossary
Glossary / Help with problems Glossary Display Occupancy override Display window of the ZAPP Function to tell the system you are receiver. present or absent. ® network ZAPP receiver ORKS ® network for commu- ZAPP receiver forwards ORKS nication among ZAPP receivers commands from the handheld(s) ®... -
Page 15: Technical Data
Technical data Technical data Service life of bat- roughly two years (al- teries kaline) Setpoint offset* From –5 to +5 °C (in 0.5 °C steps) Operating tempera- 0...50 °C ture Storage temperature –20...+70 °C Degree of protection IP 20 Maximum humidity 95 %, non condensing Help with problems Problem... - Page 16 Honeywell AG Böblinger Straße 17 manufacturing location D – 71101 Schönaich certified to phone (07031) 637-300 Subject to change without notice EN2B-0205GE51 R0101 printed in Germany 7157416...