Advertisement
17. Apply the 25 1/2" foam strip (from kit) across
end blocks and metal bracket as shown in the
illustration.
Foam Strip
Styrofoam Blocks
18. Check the evaporator fan harness. If the harness
is tight, cut the existing wire tie and rebundle the
harness using the wire ties included to provide
slack in the harness as shown in the illustration.
Foam Deflector
Styrofoam Blocks
19. Replace evaporator cover, making certain to
reattach ground wire.
20. Install new vertical air tower (from kit).
21. Reinstall light socket in new horizontal air tower
supplied in kit (if applicable).
22. Install new horizontal air tower (from kit).
23. Reinstall light lens.
Note: If horizontal air tower includes light, install
new translucent light lens from kit.
24. Install new louvered icemaker grille (from kit) to
replace original grille or scoop. Make certain
louvers are facing up as shown in the illustration.
25. Replace main control board with new control
board (from kit).
CAUTION: When pulling refrigerator away from the
wall, make certain to remain as upright as possible,
to maintain the normal curve or arch of the lower
back.
26. Check operation.
N.D. 107-23A
Advertisement
