Cisco 3600 Series Configuration Note page 11

Hide thumbs Also See for 3600 Series:

Table of Contents

Figure 9

Cisco 3640 Power Supply Wiring Harness

Cable tie-wraps

Two, two-pin

connectors

to the fans

Find the large power connector on the motherboard and remove it. On a Cisco 3620

Step 2

router, you can simply lift the plug away from the receptacle. (See Figure 10.) On a Cisco

3640 router, press the sides of the plug in toward the middle and lift it away from the

receptacle. (See Figure 11.)

Power supply

Eight-pin connector

to the motherboard

Cisco 3600 Series Power Supply Configuration Note

Removing the Power Supply

Table of Contents