Advertisement
Quick Links
Advertisement
Related Manuals for HIKVISION ColorVu DS-2CE DFT-F Series
Summary of Contents for HIKVISION ColorVu DS-2CE DFT-F Series
- Page 1 olorVu DS-2CExxDFT-F Camera Quick Start Configuration Guide...
- Page 2 AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- Page 3 DS-2CExxDFT-F Configuration Quick Start Guide • Do not connect several devices to one power adapter as adapter overload may cause overheating or a fire hazard. • Please make sure that the plug is firmly connected into the power socket. • If smoke, odor, or noise rise from the device, turn off the power at once, unplug the power cable, and then contact the service center.
- Page 4 DS-2CExxDFT-F Configuration Quick Start Guide Summary The new DS-2CExxDFT-F Series cameras not only provide 7 x 24 full-color monitoring, but also can now activate a flashing light action when certain events are detected. The connected DVR must be an –M Series device running firmware v4.20.200. If the camera is connected to a different DVR, Trigger Alarm Output will be enabled automatically and cannot not be changed.
- Page 5 DS-2CExxDFT-F Configuration Quick Start Guide Threshold (1 to 3): Sets device sensitivity. The higher the value, the easier the light will turn on. • Level (1 to 5): Sets the maximum light intensity. If set to 5, it could reach the maximum intensity •...
- Page 6 DS-2CExxDFT-F Configuration Quick Start Guide 3. If you successfully configure the flashing light alarm, the next time an event is detected, it will flash for five seconds, then stop. QSG DS-2CExxDFT-F 032520NA...