OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
l
l
Procedure
Step 1 Obtain and install OceanStor Toolkit (a tool for initializing the N8500).
In the address box of the Internet Explorer, enter http://support.huawei.com/enterprise.
Choose Software > IT > Storage > Tools and Platform > OceanStor Toolkit to download
OceanStor Toolkit V100R001CxxSPCxxx to the PC. Then, run the installation program to
install the tool as prompted.
Step 2 Double-click OceanStor Toolkit for activation. Then start the deployment tool for the clustered
NAS storage system and add software packages required for the clustered NAS deployment.
1.
Issue 02 (2015-09-22)
Item
Java operating
environment
Before the initialization, ensure that all firewall software on the maintenance terminal (PC)
has been closed.
Before the deployment, check whether the license file needs to be imported. If a license
file is required, apply for one by referring to
NOTE
After you obtain the OceanStor Toolkit package from the technical support website, apply for the
appropriate user permission.
In the main window, select ToolCase.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Version
JRE 1.6.0_20 or later
NOTE
l You are advised to install JRE1.6.0_20 for matching OceanStor
Toolkit . If a version earlier than JRE1.6.0_20 has been installed,
JRE1.6.0_20 instead of the earlier one will take effect
immediately after being installed. If a version later than
JRE1.6.0_20 has been installed, uninstall the later version before
installing JRE1.6.0_20 to enable JRE1.6.0_20 to automatically
take effect upon being installed.
l The following method of setting automatic update only applies
to a JRE version that has the Update tab page.
After you have installed the recommended JRE version, you
may be informed that the JRE version is incorrect when
downloading the DeviceManager next time. This problem
occurs because the JRE version is automatically updated to
a later one. In this situation, you are advised to disable the
automatic update function on the Java control panel after
installing the JRE. To disable the automatic update function,
perform the following steps:
1. Choose Start > Control Panel > Java. Right-click the
mouse and choose Open. The Java Control Panel dialog
box is displayed.
2. Click the Update tab.
3. Ensure that Automatic check and update check box is
not selected. If it is selected, deselect it.
4. Click OK to exit the Java Control Panel dialog box.
8 Applying for a
9 System Initialization
License.
240