First-Time Dvd/Vcr Setup - Philips DVP3345VB/F7 User Manual

Before turning on your DVD/VCR,make sure batteries are in the remote control and the DVD/VCR and TV are connected
correctly.
These menus may not appear if you have already turned on the DVD/VCR.
1
Turn on the TV. Set it to the correct Video In channel.
(Check your TV owner's manual for details.)
2
Press y. VCR light will appear on the front of the DVD/VCR. The
display shown below will appear.
These menus may not appear if you have already turned on the DVD/
VCR. You may have turned on the DVD/VCR before to find the Audio/
Video In channel of the TV, for example. If so, follow the steps on
page 21 to select a language for the VCR menus.
LANGUAGE SELECT
ENGLISH
FRANÇAIS
ESPAÑOL
PUSH
3
Press ▲ or ▼ to select ENGLISH, FRANCAIS (French) or
ESPAÑOL (Spanish) as the language for VCR On-Screen Displays
and menus.
Then, press ►.
● To put the DVD/VCR in VCR mode, press VCR so VCR light appears.

First-time DVD/VCR Setup

[ON]
1
Turn on the TV.
OPEN/CLOSE
1 2 3
4 5 6
TRACKING
7 8 9
CLEAR TITLE
+10 0
VCR SETUP DVD
DISC
INPUT MENU
OK
REW PLAY FFW
STOP PAUSE BACK
DISPLAY SUBTITLE ZOOM AUDIO
ANGLE SEARCH REPEAT REPEAT
REC SPEED MODE TIMER SET
Helpful Hint
• To skip this feature and play a tape
immediately, insert a tape with its
record tab removed.
• Repeat this process if the power fails.
15
2
3
A-B
EN - 15