First-Time Dvd/Vcr Setup - Philips DVP3345VB User Manual

14 First-time DVD/VCR Setup

Before turning on your DVD/VCR,make sure batteries are in the
remote control and the DVD/VCR and TV are connected correctly.
These menus may not appear if you have already
turned on the DVD/VCR.
1
Turn on the TV. Set it to the correct Video In
channel. (Check your TV owner's manual for details.)
2
Press y. VCR light will appear on the front of the
DVD/VCR. The display shown below will appear.
These menus may not appear if you have already turned on
the DVD/VCR. You may have turned on the DVD/VCR
before to find the Audio/Video In channel of the TV, for
example. If so, follow the steps on page 20 to select a
language for the VCR menus.
LANGUAGE SELECT
BENGLISH
FRANCAIS
ESPAÑOL
PUSH B
3
Press K or L to select ENGLISH, FRANCAIS
(French) or ESPAÑOL (Spanish) as the language for
VCR On-Screen Displays and menus. Then, press B.
●
To put the DVD/VCR in VCR mode, press VCR so VCR
light appears.
[ON]
1
Turn on the TV.
OPEN/CLOSE
1 2 3
4 5 6
TRACKING
7 8 9
CLEAR TITLE
+10 0
VCR SETUP DVD
DISC
INPUT MENU
OK
REW PLAY FFW
STOP PAUSE BACK
DISPLAY SUBTITLE ZOOM AUDIO
ANGLE SEARCH REPEAT REPEAT
A B
REC SPEED MODE TIMER SET
Helpful Hints
• To skip this feature and play a
tape immediately,insert a tape
with its record tab removed.
• Repeat this process if the power
fails.
2
3