Language (Vcr); Vcr Status Displays - Philips DVP3345VB/F7 User Manual

Follow the steps below to change the language of the VCR On-Screen Displays and menus.
1
Press VCR, then press SETUP so MENU appears.
- M E N U -
TIMER PROGRAMMING
SATELLITE LINK
AUTO REPEAT
CLOCK SET
LANGUAGE SELECT
2
Press ▲ or ▼ to choose LANGUAGE SELECT, then press ►.
3
Press ▲ or ▼ to choose ENGLISH, FRANCAIS (French) or
ESPAÑOL (Spanish).
LANGUAGE SELECT
ENGLISH
FRANÇAIS
ESPAÑOL
PUSH
4
Press CLEAR to remove the menu.
You may access Status Displays by pressing DISPLAY. The displays may include the current time, external input channel and
other information.
1
Press DISPLAY. The Count Display will appear for 5 seconds. After 5
seconds, only the real-time tape counter will appear. This counter
shows you the elapsed playing time of the tape (from the point at which
the counter was set to 0). The counter also will appear on the display
panel on the front of the DVD/VCR.
STOP
2
Press DISPLAY again. The CLOCK Display will appear for 5
seconds. After 5 seconds, only the time will appear. The time also will
appear on the display panel on the front of the DVD/VCR.
3
Press DISPLAY again to remove all the displays.
[OFF]
[ON]
STOP

Language (VCR)

1
2-3
Helpful Hint
• If you select FRANCAIS (French) or
ESPAÑOL (Spanish) and need English :
1. Press SETUP so MENU appears.
2. Press ▼ to choose SELECTION
LANGUE or SELEC. IDIOMA, then
press ►.
3. Press ▲ or ▼ to select ENGLISH.
4. Press CLEAR.

VCR Status Displays

1-3
DISPLAY SUBTITLE
Helpful Hint
• You cannot access a Status Display
when viewing a still picture, during
slow motion, or during Forward and
Reverse Searching.
21
7 8 9
4
CLEAR TITLE
+10 0
VCR SETUP DVD
DISC
INPUT MENU
OK
REW PLAY FFW
OK
REW PLAY FFW
STOP PAUSE BACK
ZOOM AUDIO
ANGLE SEARCH REPEAT REPEAT
A-B
REC SPEED MODE TIMER SET
EN - 21