Page 1
Washing machine WM..T... siemens-home.bsh-group.com/welcome Register your product online...
Page 2
Your new washing machine Read these operating and installation instructions before switching on the washing machine. You have chosen a Siemens washing machine. Display rules Please take a few minutes to read and : Warning! become familiar with the advantages of your washing machine.
Intended use Intended use Safety instructions T he following safety information This appliance is intended for private ■ I n t e n d e d u s e S a f e t y i n s t r u c t i o n s and warnings are provided to domestic use only.
Safety instructions Do not allow children to Keep packaging, plastic film ■ clean or maintain this and packing components away appliance unsupervised. from children. Keep children under 3 years ■ Warning and pets away from this Risk of poisoning! appliance. Detergents and care products Do not leave the appliance ■...
Page 7
Safety instructions dangerous situation. Ensure Warning the following: Risk of electric shock/fire/ material damage/damage to The mains voltage on your the appliance! ■ power socket must match If the appliance's mains cable is the rated voltage specified altered or damaged, this may on the appliance result in electric shock, short (identification plate).
Page 8
Safety instructions If you take hold of any of the Caution! ■ appliance's protruding parts Material damage/damage to (e.g. the appliance door) in the appliance order to lift or move it, these If the water pressure is too ■ parts may break off and high or too low, the cause injury.
Safety instructions The appliance is secured for Do not use cleaning agents that ■ transportation by transport contain solvents. locking devices. If the Warning transport locking devices are Risk of injury! not removed before the If you support your weight/sit appliance is operated, this ■...
Safety instructions drawer is opened while the Cleaning/Maintenance appliance is in operation. Warning Rinse eyes/skin thoroughly if Risk of death! they/it come(s) into contact The appliance is powered by with detergents or care electricity. There is a risk of products. If accidentally electric shock if you come into swallowed, seek medical contact with live components.
Environmental protection Do not use cleaning agents that Remove any detergent, ■ contain solvents. spray or other residues immediately. Warning Risk of electric shock/material damage/damage to the appliance! Environmental If moisture penetrates the appliance, this may cause it to protection short circuit.
Positioning and connecting Energy- and water-consumption ■ Positioning and information: These indicators tell you what the connecting relative energy and water consumption is for the selected I ncluded with the appliance programs. P o s i t i o n i n g a n d c o n n e c t i n g The more indicator segments are Check that the machine has not Note:...
Positioning and connecting Water supply hose on aquaStop Caution! models Water damage The connection points for the water Water drain hose supply hose and water drain hose are Elbow for securing the water under high water pressure. To prevent drain hose* leaks and water damage, you must Water supply hose on standard/ follow the instructions in this section.
Positioning and connecting Installation on a platform with drawer Platform order no.: WMZ 20490, WZ 20490, WZ 20510, WZ 20520 Installing the appliance in a kitchenette Take the hoses out of the holders. Warning Danger of death! There is a risk of electric shock if you touch live components.
Positioning and connecting Hose and cable lengths Notes Only operate the washing machine ■ Left-hand connection using cold mains water. ■ Do not connect the machine to the ■ mixer tap of an unpressurised hot- water boiler. Do not use a used supply hose. Only ■...
Positioning and connecting appliance (not necessary for Aqua-Stop Caution! models as this is permanently installed): Water damage When water is being pumped away, the Model: Standard ■ outlet hose is under water pressure and may slip out of the wash basin or connection point.
Positioning and connecting Electrical connection Warning Danger of death! There is a risk of electric shock if you touch live components. Never touch or hold the mains plug ■ with wet hands. Drainage into a plastic pipe with ■ Only pull out the mains cable by the rubber sleeve or into a gully ■...
Positioning and connecting The mains plug must be freely To prevent foaming, only use Note: ■ accessible at all times. If this is not half the amount of detergent possible, in order to comply with the recommended by the detergent relevant safety regulations, a switch manufacturer.Do not use detergents (2-pole switch-off) must be built into...
Page 19
Positioning and connecting Fitting the transportation securing means: Remove the covers and keep them in a safe place. If required, use a screwdriver. Insert all four sleeves. Clip the mains cable securely in the holders. Insert the transportation securing bolts and tighten them with a wrench (WAF 13).
Familiarising yourself with your appliance Familiarising yourself with your appliance Washing machine F a m i l i a r i s i n g y o u r s e l f w i t h y o u r a p p l i a n c e Service flap Detergent drawer ~ Page 30 Controls...
Familiarising yourself with your appliance Controls Content of the touch display ( Main switch You can use the # button to The display on this appliance responds switch the appliance on and off. to touch (touch display).You can 0 Programme selector activate settings by pressing lightly on You can turn the programme the touch-sensitive buttons in boxes.
Page 22
Familiarising yourself with your appliance Indicators, symbols and buttons Indicators and Setting on the control panel symbols for set- ting values 90°, 60° ü, 40° ü, 30°, 20°, Ž Temperature in °C; Ž = cold 1400*, 1200, 800, 600, 400, 2 Spin speed;...
Laundry Other indicators Information on: and symbols Tap off/water pressure too low Foam detected Off: Wi-Fi is switched off and your appliance is not connected to your home net- ■ work. Flashing: Your appliance is trying to connect to your home network. ■...
Detergent – Stains: Remove/pretreat stains Detergent while they are fresh. Firstly, dab with soapy water; do not rub.Then C orrect selection of detergent wash the items of laundry with D e t e r g e n t the appropriate program. The care label is crucial for selecting Stubborn or dried-in stains can the correct detergent, temperature and...
Programme default settings Saving energy and detergent Programme default For light and normal soiling, you can settings save energy (lower washing temperature) and detergent. T he programme default settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed and can be changed in the Saving Soiling/note...
Programme default settings should be finished backwards, in seconds after selecting the new increments of 30 minutes and up to a settings. maximum of 24 h (h=hour). Remote start After the programme starts, the selected time, e.g. 8.5 h is displayed and counted down until the washing programme starts.
Additional programme settings Reduces creasing thanks to a special Additional programme spin sequence followed by fluffing and reduced spin speed. settings The washing's residual moisture Note: You can find an overview of all of the is increased. A d d i t i o n a l p r o g r a m m e s e t t i n g s additional settings that can be selected depending on the programme on the Предв.
Operating the appliance Select the Хлопок (Cottons) 30 °C Operating the program and press the Ü button. Press the Ü button after approx. 10 appliance minutes.The laundry will soak in the water. P reparing the washing Leave the laundry to soak for as long O p e r a t i n g t h e a p p l i a n c e machine as required, then either press the Ü...
Operating the appliance If the w 3 sec display flashes, the on the appliance beforehand, you will ■ childproof lock is active. also have the option of starting the You must deactivate this first before programme via the Home Connect you can change settings or start the app.
Operating the appliance The programme starts and the Notes Ü symbol lights up. Mix items of laundry of varying ■ sizes.Laundry items of different sizes The door is locked and the distribute themselves better during corresponding ® symbol lights up. the spin cycle.Individual laundry The drum rotates and load detection items may cause an unbalanced...
Operating the appliance If you turn the programme selector or Changing the programme touch the control panel while the childproof lock is active, the w 3 sec If you have started the wrong indicator flashes briefly and a signal programme by mistake, you can sounds.
Home Connect If the k display flashes, this Note: Home Connect informs you to run the Oчиcтка барабана (Drum Clean) programme or T his appliance is Wi-Fi-capable and can any other programme at a washing H o m e C o n n e c t be remotely controlled using a mobile temperature of at least 60 °C.
Home Connect Notes Notes Please observe the safety If your home network router has a ■ ■ precautions in this instruction WPS function, you can connect the manual and make sure that these appliance to your home network are complied with even when automatically.
Page 34
Home Connect If you are not able to establish a Your mobile device now connects to Note: connection, check whether your the appliance. The connection appliance is within range of your home process may take up to 60 seconds. network. Try connecting automatically again or connect your appliance manually.
Home Connect Notes If you connect to your home network, ■ Wi-Fi is activated automatically. If Wi-Fi is activated, the appliance will ■ not switch itself off automatically. If Wi-Fi is switched off on the ■ appliance, it is not possible to use the Home Connect app to start or control the appliance remotely.
Home Connect server and checking that the remote diagnostics service is A detailed RED Declaration of available in your country. Conformity can be found online at www.siemens-home.bsh-group.com For more information and to Note: among the additional documents on the check whether the remote diagnostics product page for your appliance.
Intelligent dosing system i-Dos Detergent drawer 2.4 GHz band: max. 100 mW 5 GHz band: max. 100 mW ( ¨ dispenser for liquid detergent 0 M/¨ dispenser for fabric softener or liquid detergent; set the dispenser content ~ Page 38 8 Manual dosing compartment 5 GHz Wi-Fi: for indoor use only Before setting up i-Dos...
Intelligent dosing system Automatic dosing Notes To protect your laundry, automatic ■ dosing can only be used with certain The automatic dosage operates as programmes. follows: Switch on the appliance. : If Programs with prewash ■ A function test of the i-Dos pump unit automatic dosing is selected, takes place, and this can be detergent will be dispensed...
Intelligent dosing system Check whether the preset basic Notes dosages follow the manufacturer's The changes are applied to all ■ recommendations in terms of: programmes in which dosing is A 4.5 kg load possible. ■ For liquid detergent – the normal The changes are saved until the next ■...
Intelligent dosing system – Follow the instructions in Manual dosing chapters ~ "i-Dos Setting the For programmes in which automatic dosage" on page 38 and ~ "i- dosing is not possible or desirable, or in DosSetting the content of the M/ which it has been deactivated, you will ¨...
Intelligent dosing system Push in the detergent drawer. Press the pump unit insert and remove it. Emptying the i-Dos detergent drawer, cleaning the i-Dos Unclip the rear detergent drawer lid and remove it. detergent drawer and its housing, cleaning the i-Dos pump unit Switch off the appliance.
Appliance settings Caution! The pump unit contains electrical Clean the inside of the detergent components.These may be drawer housing. damaged if they come into contact with water. – Do not clean the pump unit in the dishwasher and do not immerse it in water.
Appliance settings You will need to activate the setting Adjustment values: Not very bright mode in order to change these settings. Normal level of brightness Activating the setting mode Bright Very bright Switch on the appliance. The settings for the current programme Exit setting mode or: are displayed.
Sensors Sensors Cleaning and maintenance A utomatic load sensing S e n s o r s Warning The automatic load sensing function C l e a n i n g a n d m a i n t e n a n c e Danger of death! adapts the water consumption ideally to There is a risk of electric shock if you...
Cleaning and maintenance Remove the detergent residue Take the drain hose out of the ■ immediately. holder. Do not clean with a water jet. Remove the sealing cap and drain ■ the water into a suitable container. Replace the sealing cap and place Drum the drain hose back in its holder.
Faults and what to do about them. The drain hose at the siphon b) For standard and Aqua-Secure models, clean the filter on the is blocked rear of the appliance: Remove the hose from the rear of Switch off the appliance. Pull out the the appliance.
Faults and what to do about them. Caution! Water damage Any escaping water may cause water damage. Do not open the door if water can be seen through the glass. Switch off the appliance. Pull out the mains plug. Drain the water ~ Page 45 Pull the emergency release downwards with a tool and release.
Page 48
Faults and what to do about them. Indicator/symbol Cause/remedy k is flashing Run the Oчиcтка барабана (Drum Clean) 90 °C program or a 60 °C program to clean and care for the drum and the outer tub. Notes Run the program without laundry. ■...
Faults and what to do about them. Faults and what to do about them. Faults Cause/remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ appliance. Tighten the threaded joint on the supply hose. ■ The appliance is not filling For some programs (e.g.
Page 50
Faults and what to do about them. Faults Cause/remedy Detergent/fabric softener Clean and refill the dispensers. has congealed in the dis- ~ "Emptying the i-Dos detergent drawer, cleaning the i-Dos detergent drawer pensers. and its housing, cleaning the i-Dos pump unit" on page 41 ~ "Filling the dispensers"...
Page 51
Faults and what to do about them. Faults Cause/remedy The duration of the pro- Not a fault – the program sequence is optimised for the specific washing pro- gram changes during the cess. This may change the program duration shown on the display panel. wash cycle.
Technical data Technical data After-sales service I f you cannot rectify a fault yourself, D imensions: T e c h n i c a l d a t a A f t e r - s a l e s s e r v i c e 850 x 600 x 590 mm contact customer services.
Aqua-Stop warranty Aqua-Stop warranty O nly for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a...
Page 54
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001475981* 9001475981 (0002)