Voice Command - Philips CT3308/00SRASIA User Manual

Opens the Alarm
Opens the Screen saver
On/Off menu.
Launches a WAP session.
L
Subscription dependent
Voice command menu allows you to quickly activate a specific function: instead
of programming a hotkey, you simply set a voice tag that will activate a feature
when you pronounce the associated word. You can associate a Voice command
to the functions supported by the Hotkeys (see page 30).
1 To set a voice tag for voice command, press
command and press
2 Select <New>
to be set with a voice tag. Press
3 When Press OK and speak
the screen. When prompted to record your voice tag, make sure you are
in a quiet environment, choose a short and simple word and clearly
pronounce it.
4 The next carousel menu allows you to
Change the function
tag used for this function.
5 Repeat the steps described above to add more voice commands. Then
make a short press on
press to go back to idle.
6 To activate a feature using the voice command, press and hold
in idle mode, then say the recorded voice tag.
Words recorded as voice tags can be played, changed or deleted at any time.
You can also set a voice tag for a voice dial instead of a voice command.
The duration of a voice tag is 2 seconds. Up to 15 voice tags can be defined and
shared between voice dial and voice command.
Quick Settings
menu.
,
.
,
and press , then browse the list to select the function
,
appears, follow the instructions displayed on
associated with this voice tag or
e
to go back to the previous menu or a long
Settings &
Displays the remaining
credit balance.
L
Subscription dependent
Opens the Brick
L
Subscription dependent
Opens the Images Album
menu.
,
, select Settings
to confirm your choice.
Delete or Play
Change the voice
Game.
> Voice
the voice tag,
,
when
31