Table of Contents
Advertisement
3
Answer a call
When receiving a call, the
and/or vibrates and the headset beeps. To answer the call, press the Answer/
end button of the headset or press
press
L
Toggle between headset and mobile
While in communication with a correspondent, you can switch your call from
the headset to the mobile and vice versa as follows: while the call is in progress,
Move to headset
press
confirm your choice.
You can also
Move to phone
headset.
Voice command and voice dial
You can also use your Bluetooth headset for a direct access to several functions
(voice dial and voice commands) by saying the associated word. To configure
the voice tag for each wanted function, see "Voice dial" page 15.
You can also associate the Voice command to the functions supported by the
Hotkeys (see "Hotkeys" page 30).
L
Pair and use a PC or PDA
Pairing process
A PC or PDA must also be paired with your mobile phone via the
Bluetooth setting
L
The pairing process will take place on both the mobile and the external device,
and the same pairing code must be entered on both devices. If not supplied
with your Bluetooth device or card, you can enter the code of your choice.
L
70
To end your call, simply press the Answer/end button on the headset, or
the hang-up key on your mobile phone.
,
.
To answer a call with the headset, it must be fairly close to your mobile phone.
,
, select
Move to headset
Move to headset
In case of a
Redial
or a
press the headset key to activate the audio link.
>
Discoverable
You must turn on both devices before running the pairing process. In this mode,
your mobile phone is detected by the PC or the PDA, from which you must launch
the pairing process which should take place within 1mn50s.
A pairing code (16 characters max.), allows the mobile to identify and
differentiate several devices from one another.
Incoming call
symbol flashes while your mobile rings
,
on the phone, select
or
Move to phone
by pressing the answer/end button of the
Reply
voice command, launch the voice command, and
submenu.
Use headset
and
,
and press
to
Settings
Bluetooth
features
>
Advertisement
Table of Contents
