Table of Contents
Advertisement
As shown below, two types of settings must be configured before using
the e-mail feature: the settings you get from your operator, needed to connect
to the network (see "GSM network"), and the ones you get from the e-mail
service provider to connect to his server (see "E-mail server access").
Your phone might have been pre-configured. In this case, most
parameters are already set and you don't have to change them
(except for Login,
Password
you create an e-mail account).
L
In some cases, your operator might also be your e-mail service provider.
This menu allows you to enter or change the GSM settings communicated to
you by your operator, which are:
The
Phone Number
your ISP and needed to establish a connection. Press left or right to select:
-
ISDN Nber
-
Analogic Nber
L
Contact your ISP to know what type of number you should select.
The
Auto disconnection
which the phone automatically disconnects (if a connection was is progress)
from the network. Press left or right to select a value from 3 to 10mn and press
,
to validate.
L
The lack of exchanges with the network (connecting, sending an e-mail,
disconnecting) defines the inactivity time period leading to auto disconnection.
Login
and
Password
Enter them also accordingly.
The menus described in this section feature settings needed to connect to the
e-mail server of your Internet Service Provider (ISP) via your mobile phone.
Most parameters are communicated to you by service provider and must be
entered as given.
and
E-mail address
-
-
field allows you to enter the phone number provided by
to enter an ISDN ISP number, OR
to enter an analogic number, then press
field allows you to select an inactivity time period after
were defined by you when you subscribed to your account.
which are defined by you when
-
,
E-mail
.
57
Advertisement
Table of Contents
