GE Albeo ALR1 Series Installation Manual page 3

4
Lift LED strip from housing and disconnect from
the LED driver.
6
Connect the AC line to the black (line) and white
(neutral) input wires of the LED driver using
14-18AWG twist-on wire connectors. Connect the
ground wire to the green grounding wire.
8
Reinstall the lens and secure the latches.
Rigid conduit Flexible conduit
5
Connect a rigid conduit or flexible conduit or
strain relief and feed the AC line wire through
the fitting.
7
Reconnect similarly-colored wires from LED driver
to LED strip. Then reattach the LED strip making
sure the two end clips are properly engaged.
Strain relief