Advertisement
Components Included
1
Housing (1)
2
Lens (1)
3
Driver enclosure (1)
4
LED driver (2)
5
LED strip (1)
6
Housing latches (6)
7
Mounting brackets (2)
8
Endplug (1)
Installation
1
Mount the wrap-around brackets on the ceiling or support rail using appropriate hardware. After brackets are
secured in place, install one side of the housing in the bracket, then rotate up and snap the other side of the
housing into bracket. Chain and "S" hook (not included) can also be used to support the brackets
2
Unfasten the latches and remove the lens.
7
6
5
3
1
4
Squeeze the enclosure at the end and remove
LED stip.
8
3
2
Chain and "S" hook
Advertisement
