Fixing The Spacer Bar; Granite Worktops - Miele KM 404 Installation Instructions Manual

Fixing the spacer bar

c
^ Position the spacer bars b in the
positions shown in "Fitting the spacer
bars and support brackets" so they
are flush with the top edge of the
cut-out, and secure with the 3.5 x 25
mm screws supplied.
^ Then fill in gap c between the bars
and the worktop with silicone from
the tube supplied.
Installation KM 404 / KM 405 / KM 406
d

Granite worktops

^ With granite worktops the spacer
bars b must be positioned and
secured with strong double-sided
adhesive tape. In addition, coat the
edges with silicone and fill in gap c.
The screws are not required for granite
worktops.
15