Table of Contents
Advertisement
Now open up Native Instrument's KONTAKT 5.8.1 (or higher) and locate the
folder that you've copied / extracted the
RA_ATHEOS.zip
contents to.
NOTE: ATHEOS does not appear as a library in Kontakt. You also don't need a
serial key / activation for it.
In KONTAKT, use the Files tab (browser) to navigate to that location:
Load the
_atheos_(snapshots).nki
instrument.
NOTE: If you are experiencing loading problems or missing content warnings
from Kontakt, please head over to the troubleshooting section of this manual!
Once that is done, click one the wrench icon in the upper header section
(directly above the Rigid Audio logo). You are now in the instrument edit mode.
Advertisement
Table of Contents
