9. Sequencer Targets
Each sequencer features four freely assignable targets.
With these, you can choose what the current sequencer pattern should
modulate.
In the above picture, we are modulating a „sv lp2" filter which has been inserted
into effect slot #3. Besides this, we are also modulating the filter cutoff
frequency from the current engine.
Before you can select a target for any of the four available target slots, you'll
first need to select a target category:
Choose „---" if you don't want to modulate anything with the current target slot.
The „---" button underneath the target category let's you select the actual
target parameter that you want to modulate.