Connecting Devices To The Server - Cisco C880 M5 Installation Manual

5.4

Connecting devices to the server

The connectors for external devices are on the front of the server. The
additional connectors available on your server depend on the expansion cards
installed (e.g. optional SAS connector).
Some of the devices that can be connected may require special
software, e.g. drivers (see the documentation for the connected device).
On the front of SB#0, there are four USB connectors ① and a video
connector ②.
Connecting the monitor
Plug the data cable for the monitor into the video connector on the front of

SB#0.
Connect the power cord of the monitor to a grounded mains outlet of the in-

house mains and/or into the mains socket strip of the rack.
Figure 5.2: Connectors on the front
①
Cisco C880 M5 Installation manual
②
37