6
Place the rubber cushion over the end of
the bolt.
7
Slide the unit into the dashboard until a
click sound is heard.
8
Reconnect the negative terminal of the car
battery.
Install remote control battery
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fi re. Never discard batteries in fi re.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
•
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
For fi rst-time use:
16
EN
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 batteries with correct
polarity (+/-) as indicated.
Close the battery compartment.
Turn on
1
Press the
knob to turn on the unit.
»
The unit plays the last listened
program: DVD, Radio, USB or SD/
MMC Card (if there is USB device or
SD/MMC card connected).
•
To turn off the unit, press the
more than 2 seconds.
•
When the unit is idle for over 5 minutes, it
goes to standby mode and displays screen
saver.
Select display language
English is the default language for screen display.
You can change the display language.
1
Press MENU.
»
The main menu is displayed.
knob for