Install Remote Control Battery; Turn On; Set Clock - Philips CED750/51 User Manual

9
Reconnect the negative terminal of the
car battery.

Install remote control battery

Caution
• Risk of explosion! Keep batteries away from
heat, sunshine or fi re. Never discard batteries
in fi re.
Note
• Remove batteries if they are exhausted or if
the remote control is not to be used for a long
time.
•
Batteries contain chemical substances, they
should be disposed of properly.
• Perchlorate Material - special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.

Turn on

Caution
•
Risk of road accidents! Never watch video or
adjust settings while you drive.
1
Press to turn on the unit.
»
The screen opens automatically.
»
The available OSD (On-Screen
Display) languages are displayed.
2
Touch a language to select.
»
The OSD language is changed to the
selected language immediately.
• To adjust the screen tilt, press
• To close the screen, press
• To adjust the brightness/contrast, press
/ , then adjust 4 WAY NAVIGATION.
• To turn off the unit, press
seconds.
»
The screen closes automatically.

Set clock

1
Touch to display main menu.
TILT .
OPEN/CLOSE.
for 3
EN 17