Options Setting; Starting A Cycle; Interruption Of A Program; Changing A Program - Zanussi ZWH71046 User Manual

16 www.zanussi.com

5.3 Options Setting

If you want your laundry to be spun or use
1.
temperature different from the one
proposed by the washing machine, pess
the Spin "
touchpads repeatedly to change the spin
speed and temperature.
Press the option touchpads, if you want
your laundry to be washed with special
functions.
-
Different functions can be combined
which is dependent on the program
selected.
-
If an option is not compatible with
the wash program selected, symbol
"
with buzzer sound.
2.
If you want to adjust washing time, press
the "Time Adjust (
to increase or decrease washing time. See
Time Adjust guide on page 12.
If you want to define the end of the washing
program, press the "Delay End (
touchpad repeatedly to choose your
washing machine working time.

5.4 Starting A Cycle (

To start a program, press the Start/Pause
touchpad. The corresponding pilot light will
stop flashing and a default program duration
will be displayed on the screen.
-
If you press any touchpad while a program
is operating, symbol "
display along with buzzer sound. (except
Start/Pause touchpad)
-
If you turn the program selector knob to
another program when the machine is
working (except "Off" to switch off the
machine), symbol "
along with buzzer sound to indicate a wrong
selection. The machine will not perform the
new selected program.
After approx. 15 minutes from the
start of a program:
The appliance will automatically adjust the
-
selected program duration according to the
type and size of the load.
-
The display will show adjusted program
duration.
" and the temperature "
" will flash on display along
)" touchpad repeatedly
)
" will flash on
" will flash on display

5.5 Interruption Of A Program

-
To pause, press Start/ Pause. The
indicator will start flashing.
-
Press the Start/Pause again. The
"
program will continue.

5.6 Changing A Program

Changing a running program is possible
only by resetting it.
-
Turn the program selector knob to the
position "Off" to cancel the program
and to turn off the appliance.
-
Turn the program selector knob to the
new program position and change any
available options. Press Start/Pause
to start the new program.

5.7 Changing The Options

)"
It may be possible to change some of the
options after a wash program has started.
1. Press the touchpad Start/Pause. The
indicator will start flashing.
If available change the options that
2.
you wish.
3. Press Start/Pause again. The program
will continue.

5.8 Opening The Door

While a program or the Delay End is
operating, the appliance door is locked
and the display shows the indicator "
First, set the machine to PAUSE by
pressing the "Start/Pause" touchpad. Wait
until the door lock indicator "
then the door can be opened.
If the door lock indicator "
disappear, this means that the machine
is already heating and the water level is
above the bottom edge of the door or the
drum is turning. In this case the door
CAN NOT be opened. If you need to
open it, you must drain the water to open
the door.
In case of emergency please
refer to "Emergency door
opening" on page 27.
The appliance will not drain the
water (except programs; Spin,
Rinse + Spin, Vapour Fresh).
".
" goes off,
" does not