Settings - Zanussi ZWH71046 User Manual

12 www.zanussi.com
Countdown
Pressed
Start/Pause
After selecting Delay End time, press
Start/Pause touchpad to start the
program. Machine will then countdown
and update time on the display every
hours until it reaches the starting point of
the wash cycle.
If you wish to modify or cancel Delay End
option after starting the program, follow
the steps below:
- set the washing machine to PAUSE by
pressing "Start/Pause" touchpad;
deselect this option by pressing "Delay
-
End" touchpad repeatedly till the
display shows delay time "
press the "Start/Pause" to start the
-
program.
Easy Iron Touchpad (
When selecting this option, the laundry is
gently washed and spun to avoid
creasing. In this way, ironing is easier.
The indicator of this option will be on.
Prewash Touchpad (
Select this option if you wish your laundry
to be pre-washed before the main wash.
Use this option for heavy soil. The
indicator of this option will be on.
When you set this function, put the
detergent into the "
This function increases the program
duration.
Time Adjust (
This option allows you to adjust the wash
time. Press this touchpad repeatedly to
decrease or increase the wash time
according to the soil level of your wash.
Use the table below as a guide.
Soil Level
Wash Level
"Delay End" Time : 6 hrs.
Working Cycle
2.40 hrs. 3.20 hrs.
Start the
Program
)
" compartment.
)
Light Medium Normal Heavy
Vapour Touchpad (
Select this option to add approximately
30 minutes of tumbling in vapour during
the wash cycle. Vapour helps open fabric
fibers up to allow laundry additives to
End of
release tough stains. The indicator of this
Cycle
option will be on.
NOTE:
●
Vapour may not necessarily be visible
inside the drum during a vapour wash
cycle. Vapour is created below the
drum and allowed to naturally rise into
the clothes.
●
Vapour may not be present during the
entire vapour wash cycle.
●
Vapour function is more effective with
half load.
●
At the end of the Vapour cycle, the
clothes will be warmer, softer and
detached from the drum.
";
)

3.6 Settings

Child Safety Lock Option (
Your appliance is provided with CHILD
SAFETY LOCK which permits you to
leave the appliance unsupervised with
the door closed without having to worry
that children might be injured by or cause
damage to the appliance.
To set "Child Lock" option:
●
To activate the function, press
"Rinse + (
touchpads at the same time until the
display shows the symbol "
●
To deactivate the function, press
"Rinse + (
touchpads at the same time until the
symbol "
If Vapour option is selected, rinse
temperatures will be elevated.
During a vapour cycle, you may
notice vapour exiting from the drain
hose of the washing machine, this
is normal and there is no cause for
alarm.
Set this option after pressing the
Start/Pause touchpad.
) and Easy Iron (
) and Easy Iron (
" goes off.
This function remains enabled
even after the appliance is
switched off.
)
)
)"
".
)"