Long Range Nav Tracking - Honeywell KFC 150 Pilot's Manual

N
A
Objective: Intercept the desired course and complete a "direct to" operation after passing
waypoint " B while coupled to a Long Range Nav.
1. The aircraft is engaged in
Heading (HDG) and
Altitude Hold (ALT) mode.
A flight plan from waypoint
" A to
" B to "C'
is entered in
the Long Range Nav. The
course pointer is selected
to 090m and NAV Arm is
activated by pressing the
NAV button. The aircraft is
heading
045-
to intercept
the course. As the course
deviation bar moves toward
the center position, NAV
mode is coupled and tracks
the Long Range Nav.
2.
As the aircraft crosses way-
point 'B", the course pointer
must be rotated to reflect
the course or bearing to the
new active waypoint (135-
in this case).
I
3. The aircraft changes the
active waypoint to
"D" via a
"direct to" operation with the
Long Range Nav. The
course pointer must be
rotated to 2 2 5 . . to reflect
the bearing to
"D.
The
autopilot will then correctly
track the course to way-
point " D .
NOTE: The course arrow on the KI 525A must be set at the
Desired Track or OBS setting indicated by the Long Range Nav.
Moving the course pointer does not affect movement or location
of the Left/Right D-Bar. However, in order for the KFC 150 to
track the course, the proper course must be set in the HSI.
32