Table of Contents
Advertisement
2-2
Important Directions for Use
Areas of Use and Application
2.2
Inappropriate Use
The embedded terminals IndraControl VEP are PC-based machine
operator terminals, that can – depending on the application or
configuration – also perform control functionalities.
Note:
The embedded terminals IndraControl VEP may only be used
with the accessories and parts specified in this document. If a
component has not been specifically named, then it may not
be either mounted or connected. The same applies to cables
and lines.
Operation is only permitted in the specified configurations and
combinations of components using the software and firmware
as specified in the relevant function descriptions.
The embedded terminals IndraControl VEP have been developed for use
in control tasks.
Typical areas of application of the IndraControl VEP devices:
•
Handling and assembly systems,
•
Packaging and foodstuff machines,
•
Printing and paper processing machines,
•
Machine tools.
IndraControl VEP-type devices may only be operated under the assembly,
installation and ambient conditions as described here (temperature,
system of protection, humidity, EMC requirements, etc.) and in the
position specified.
Using the embedded terminals IndraControl VEP outside of the above-
referenced areas of application or under operating conditions other than
described in the document and the technical data specified is defined as
"inappropriate use".
The embedded terminals IndraControl VEP may not be used, if
•
they are subject to operating conditions that do not meet the above
specified ambient conditions. This includes, for example, operation
under water, in the case of extreme temperature fluctuations or
extreme maximum temperatures or if
•
Bosch Rexroth has not specifically released them for that intended
purpose. Please note the specifications outlined in the general Safety
Instructions!
IndraControl VEP30.2 40.2 and 50.2
DOK-SUPPL*-VEP**.2****-PR01-EN-P
Hide quick links:
Advertisement
Chapters
Table of Contents
