Important Instructions On Use; Appropriate Use; Introduction; Areas Of Use And Application - Bosch Rexroth IndraControl VEH 30.1 Project Planning Manual

Project Planning Manual | Rexroth IndraControl VEH 30.1
2

Important Instructions on Use

2.1

Appropriate Use

2.1.1

Introduction

2.1.2

Areas of Use and Application

Rexroth products represent state-of-the-art developments and manufacturing.
They are tested prior to delivery to ensure operational safety and reliability.
Therefore the products may only be used for the intended purpose. If they are
not used as intended, situations causing personal injury as well as material
damage can occur.
Rexroth disclaims as manufacturer any warranty, liability or dam‐
ages occurring due to inappropriate use of the products. Further‐
more, Rexroth is not paying any compensation; the user is
responsible for any risks resulting from inappropriate use of the
products.
Before using Bosch Rexroth products, the following requirements must be met
to ensure appropriate use of the products:
● Anyone handling one of the Rexroth products in any way has to read and
understand the respective safety-related guidelines as well as the instruc‐
tions on appropriate use.
● Hardware products have to remain in their original state, i. e. no modifi‐
cation regarding the design is allowed. Software products must not be
decompiled and their source codes must not be modified.
● Damaged or faulty products must not be implemented or put into opera‐
tion.
● It must be ensured that the products are installed as specified in the doc‐
umentation.
The Embedded Terminal IndraControl VEH 30.1 is a PC-based operating and
visualization device that can also fulfill control functionalities, depending on the
application or configuration.
The Embedded Terminal IndraControl VEH 30.1 may only be used
with the accessories and add-on components specified in this doc‐
umentation. Components that are not mentioned explicitly must
neither be mounted nor connected. The same applies for cables
and wires.
An operation may only be carried out in the component configura‐
tions and combinations specified and with the software and firm‐
ware specified in the respective functional description.
The Embedded Terminal IndraControl VEH 30.1 was developed for use in con‐
trol tasks.
Typical areas of application of the IndraControl VEH 30.1 are:
● Handling systems and assembly systems
● Packaging and food processing machines
● Printing machines and paper processing machines
Electric Drives | Bosch Rexroth AG
and Controls
Important Instructions on Use
5/68