Audio Output Settings - Philips DVDR5500/05B User Manual

Audio output settings

HDMI audio
Sound mode
Night mode
dvdr5500-05n31_eng_25722.indd 63 dvdr5500-05n31_eng_25722.indd 63
System Menu Options
(underlined options are the factory default settings)
This setting is only required if you have used the recorder's HDMI
OUT socket to connect your TV or other display device.
{ Auto } – Select this to enjoy the multi-channel audio
output through your HDMI connection.
{ Disable } – Select this if the connected device is not able to
output the sound through the HDMI connection
or the playback audio format is not supported by
HDMI connection (e.g., projector, SACD).
Notes:
– Ensure that you have alternative audio connection from the recorder
to your TV or the display device for the sound output.
– It is not possible to listen to SACDs or copy-controlled DVD-Audio
CPPM (Content Protection for Playable Media) sources using the HDMI
connection.
This setting is only required if you have used the recorder's
AUDIO OUT L/R sockets to connect another audio/video device.
{ Stereo } – Select this to hear the sound from the left and
right audio channels. Use this setting when this
recorder is connected to a TV or Stereo system.
{ Surround } – Select this if the connected audio/video device is
compatible with Dolby Surround. Dolby Digital
and MPEG-2 multi-channel are mixed to a Dolby
Surround compatible two-channel output signal.
This mode optimises playback of sound at low volume. High
volume outputs will be softened and low volume outputs are
brought upward to an audible level.
{ On } – Turn on night mode.
{ Off } – Turn off night mode feature. Select this to enjoy
the surround sound with its full dynamic range.
(continued)
63
2007-05-30 10:04:03 AM 2007-05-30 10:04:03 AM