Connecting The Video Cable - Philips DVDR5500/05B User Manual

Step 1: Basic Recorder Connections
ANTENNA
TO TV IN

Connecting the video cable

This connection enables you to view the
playback from this recorder. You only
need to choose one of the options below
to make your video connection.
– For a standard TV, follow options
1, 2 or 3.
– For a progressive scan TV, follow
option 4.
– For a HDMI TV, follow option 5.
Helpful Hint:
– Audio connection is required if you are
using the Y Pb Pr, S-VIDEO or CVBS socket
to connect your TV. Read chapter
"Connecting the audio cables" for details.
16
dvdr5500-05n31_eng_25722.indd 16 dvdr5500-05n31_eng_25722.indd 16
EXT 2 TO VCR/SAT EXT 1
HDMI OUT
TV
VIDEO
TO TV
L
(CVBS)
S-VIDEO
R
(Y/C)
COAXIAL
VIDEO OUT AUDIO OUT
(DIGITAL OUT)
Option 2
Option 1
OR
S-VIDEO IN
Option 1: Using the Scart socket
Connect the scart cable from the EXT1
TO TV socket on the recorder to the
corresponding SCART input socket on
the TV.
Helpful Hint:
– Use the EXT2 TO VCR/SAT socket to
connect the recorder to additional device.
Option 2: Using the S-Video socket
Connect an S-video cable (not supplied)
from the S-VIDEO (Y/C) socket on the
recorder to the S-Video input socket
(usually labelled as Y/C or S-VHS) on the
TV.
Option 3: Using the Video (CVBS)
socket
Connect a composite video cable (yellow -
not supplied) from the VIDEO (CVBS)
socket on the recorder to the video input
socket (usually labelled as A/V In, Video In,
Composite or Baseband) on the TV.
(continued)
P R Y
P B
COMPONENT
VIDEO OUT
Option 3
OR
2007-05-30 10:03:46 AM 2007-05-30 10:03:46 AM