RIDGID KJ-2200 Manual
  1. Manuals
  2. Brands
  3. RIDGID Manuals
  4. Other
  5. Kollmann KJ-2200
  6. Manual

RIDGID KJ-2200 Manual

Water jetter machine
Hide thumbs Also See for KJ-2200:
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
KJ-2200
Water Jetter Machine
KJ-2200 Water Jetter Machine
Record Serial Number below and retain product serial number which is located on nameplate.
Serial
No.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com

Advertisement

Table of Contents
loading

Related Manuals for RIDGID KJ-2200

Summary of Contents for RIDGID KJ-2200

  • Page 1 KJ-2200 Water Jetter Machine KJ-2200 Water Jetter Machine Record Serial Number below and retain product serial number which is located on nameplate. Serial Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com...

  • Page 2: General Safety Information

    ON. A wrench or a key that is left attached to Read this operator’s manual carefully before using the RIDGID KJ-2200 Water Jetter. Failure to un- a rotating part of the tool may result in personal injury. derstand and follow the contents of this manual •...

  • Page 3: Description, Specifications And Standard Equipment

    Jetter can be either hand carried or combined with a two 66732 HF-4 Quick Connect Hose wheeled cart and hose reel. The KJ-2200 has a 5.5 HP 48367 H-25 Winterizing Kit gasoline engine with a 2200 psi pressure rating and a 2.4...

  • Page 4: Machine Assembly

    The H-30 Cart and Hose Reel is designed to accept the ous injury. Only use hoses that are rated above 2200 psi. KJ-2200 without the need of tools. Lift the jetter onto the deck and place over the locator pins. Hold in place and at- Machine and Work Area Set-Up tach front and back clips to jetter base.
  • Page 5 KJ-2200 Water Jetter Machine 6. Open the inlet supply valve and run water through the jetter and hoses. 7. Continue to run water through the jetter until all air has been purged. 8. Close the inlet supply valve. Figure 1 – Connect water supply hose to jetter. Close inlet supply valve (shown in closed position) 3.
  • Page 6 Carbon monoxide poisoning can occur if operated in a confined area. Engine Start-Up and Pressure Adjustment NOTE! The KJ-2200 Jetter has a pulse actuator on the pump. This actuator must be in the OFF (rotate counter-clockwise) position prior to starting the jet- ter (Figure 3).
  • Page 7 Pressure Wash Package (Optional Accessory) The KJ-2200 can operate as a pressure washer to spray wash service vehicles, tools, drain cleaning equipment and cables. The wash wand mounted to the ″ x 35′...

  • Page 8: Maintenance Instructions

    Accessories 3. The black nozzle end has two adjustment. By rotating the nozzle, the wash pattern can be wide or narrow. Only the following RIDGID products have WARNING The nozzle also has a FORWARD (low pressure) been designed to function with the Water Jetting Machine.

  • Page 9: Service And Repair

    KJ-2200 Water Jetter Machine Service and Repair facturer recommends an oil change after 40 hours of break-in operation and every 500 hours thereafter. WARNING Inlet Filter Screen Before each use: • Check inlet filter screen for debris that can restrict water flow into the pump resulting in poor perfor- mance.

Table of Contents