Cisco UCS 5108 Installation Manual page 14

Server chassis

Hide thumbs Also See for UCS 5108:

Table of Contents

Cisco UCS 2408 IOM

• Multiple Cisco UCS 1300 Series and 1400 Series Virtual Interface Cards (VICs)

• M4 and M5 generations of Cisco UCS B-Series blade servers.

• The UCS 2408 IOM requires Cisco UCS Manager 4.0(4c) or later software.

The Cisco UCS 2408 IOM provides chassis management control and blade management control, including

control of the chassis, fan trays, power supply units, and blades. It also multiplexes and forwards all traffic

from the blade servers in the chassis to the 10/25-Gigabit Ethernet uplink network ports that connect to the

fabric Interconnect. The IOM can also connect to a peer IOM to form a cluster interconnect (1G Ethernet

connection).

Figure 9: Cisco UCS 2408 IOM

Cisco UCS 5108 Server Chassis Installation Guide

Note

The UCS 2408 IOM is supported with the UCS 6400 Series FIs only.

Overview

Table of Contents