Operation After A Fire Alarm Has Been Cleared - Honeywell NOTIFIER ONYX FirstVision Installation And Operation Manual

Operation After a Fire Alarm Has Been Cleared

With the front door open; touching the Event List button will display a listing of the current alarms.
3:41:05 PM
4.4 Operation After a Fire Alarm Has Been Cleared
If fire alarm was the only event being reported; then after a fire alarm has been cleared from the
panel that F
• The fire alarm is cleared from the Event List.
• Any flashing fire alarm related device icons will no longer be displayed.
• If a screen saver is being used; the screen saver will automatically start when the screen saver's
Wait setting is reached.
• F
IRST
NOTE: Remember to go to F
network because F
F V ™ Installation and Operation Manual - P/N: 53034:Rev: A2 10/29/07
IRST ISION
Figure 4.9 F
IRST
V monitors; the following takes place on F
IRST ISION
V returns to normal monitoring operation.
ISION
V
IRST ISION
V 's door will need to be latched closed.
IRST ISION
V Display Example: Event List
ISION
IRST
after a fire alarm has been cleared from the monitored
Operating Basics of F V
IRST ISION
V :
ISION
37