Table of Contents
Advertisement
Setting the Date & Time When You First Use the Camera
The first time you switch the camera on
after purchasing it
A screen for setting the time appears. If you do
not set the date & time, the correct date & time
will not be recorded on photographed images.
1.
Press [
] (Power) to switch the
camera on.
2.
Set the date & time.
Tap the year, month, day, hour, minute or am (or pm)/
24h and then swipe up or down to change the setting.
3.
Once you have finished setting the date &
time, tap
to complete the settings.
If you set the date or time incorrectly, you cannot correct it using the above
procedure. Refer to page 62 to correct the settings.
NOTE
• If you set the time and then immediately remove the battery, the set time may be
reset. After setting the time, leave the battery in the camera for at least 24 hours.
[
] (Power)
20
Adjust
Adjust
Introduction (Basic Operation)
Advertisement
Table of Contents
