Pizza Function - Breville the Smart Oven Pro Instruction Book

PIZZA FUNCTION

The PIZZA function melts and browns
cheese and toppings, while crisping up
the pizza crust.
1. Insert the wire rack, with the spokes
facing upward, into the middle rack
height position.
2. Close the oven door.
3. Turn the FUNCTION dial until the
indicator on the LCD screen reaches the
PIZZA function. The top figure on the
LCD screen indicates the preset PIZZA
temperature of '210°C', while the bottom
figure indicates the preset time of
':20 MINS'. The preset CONVECTION
and FROZEN settings will also be
displayed.
4. The pizza temperature and time can
be adjusted before or during the cycle.
a) The pizza temperature is displayed as
the top figure on the LCD screen. Turn
the TEMPERATURE dial to adjust the
baking temperature from 50°C/120°F to
a maximum of 230°C/450°F.
b) The pizza time is displayed as the
bottom figure on the LCD screen.
Turn the TIME dial to adjust the
time up to 2 hours.
16
5. Press the START/CANCEL button to
activate the PIZZA function. The button
backlight will illuminate red, the oven
alert will sound and the LCD screen will
illuminate orange. The LCD screen will
indicate a blinking 'PREHEATING'.
6. Once the oven has reached the set
temperature, the temperature alert
will sound.
7. Place food, positioned on the included
pizza pan, on the center of the wire rack so
air will flow around all sides of the food.
8. After the PREHEATING alert has sounded,
the timer will automatically begin to count
down. The temperature and time can be
adjusted during the cycle by turning the
corresponding TEMPERATURE and TIME
dial. The cycle can be stopped at any time
by pressing the START/CANCEL button.
PRESS
9. At the end of the PIZZA cycle, the oven
alert will sound. The START/CANCEL
button backlight will go out and the LCD
screen will illuminate blue.