Table of Contents
Advertisement
More Information
Table 3
Acronym/Term
ISDN
ITU
LED
MIB
NI-2
NT1
PEM
PSTN
SDB
SMB
SRAM
TAC
VCI
VPI
VIS
More Information
Your Cisco 6260 NI-2 DSLAM and Cisco IOS software running on an NI-2 module installed in
Cisco 6260 NI-2 DSLAMs have extensive features and functionality, which are documented in the
following resources:
•
•
•
•
•
•
Cisco ATUC-4DMT-ISDN Line Card Installation and Configuration
18
Acronyms and Term Definitions (continued)
Definition
Integrated Services Digital Network
International Telecommunications Union
Light emitting diode
Management Information Base
Network interface module type 2
ISDN network terminal type 1
Power entry module
Public switched telephone network
Serial data bus
Serial management bus
Serial random-access memory
Cisco technical assistance center
Virtual channel identifier
Virtual path identifier
Visible
For Cisco IOS software configuration information and support, refer to the Configuration Guide for
Cisco 6000 Family DSLAMs with NI-2 and the Command Reference for Cisco 6000 Family
DSLAMs with NI-2 in the Cisco IOS software configuration documentation set that corresponds
with the software release installed on your Cisco 6260 NI-2 DSLAM hardware.
You can access Cisco IOS software configuration and hardware installation and maintenance
documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or
http://www-europe.cisco.com.
For hardware installation and maintenance information about Cisco 6260 NI-2 DSLAMs, refer to
the Cisco 6260 Hardware Installation and Troubleshooting User Guide.
For hardware installation and maintenance information about the Cisco 6260 NI-2 DSLAM
module, refer to the NI-2 Line Card Installation and Configuration for the Cisco 6260 document.
For hardware installation information about the Cisco 6260 NI-2 DSLAM system I/O card, refer to
Cisco 6260 Hardware Installation and Troubleshooting User Guide.
To view Cisco documentation or obtain general information about the documentation, see the
"Cisco Connection Online" section on page 19 or the "Documentation CD-ROM" section on
page 20, or call Customer Service at 800 553-6387 or 408 526-7208. Customer Service hours are
5:00 a.m. to 6:00 p.m. Pacific time, Monday through Friday (excluding company holidays). You
can also send e-mail to cs-rep@cisco.com, or refer to the Cisco Information Packet that shipped
with your line card.
78-10981-01
Advertisement
Table of Contents
