Checking Boot Mode Settings - NEC Express Server Express5800 Series Installation Manual
Linux
Hide thumbs
Also See for Express Server Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 1 Installing Operating System
2.2.3
Checking Boot Mode Settings
Check Boot Mode settings before setup.
1.
When you move the cursor onto Boot, the Boot menu appears.
Check the settings of Boot Mode. If the mode is not [UEFI], change it to [UEFI].
2.
Move the cursor onto Save & Exit, and the Save & Exit menu appears.
3.
Select Save changes and Exit and press Enter.
The following confirmation window appears.
4.
On the confirmation window, select Yes and press Enter.
Parameters are saved and SETUP is closed.
Now setting before setup is completed.
System reboots when SETUP completes.
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
2. Setting up
17
Advertisement
Table of Contents
