Ft Server Control Software Support Service; Tower Conversion Kit; Dust Proof Filter; Boot Mode Setup Option - NEC EXPRESS5800/R320e-M4 Configuration Manual

CONFIGURATION GUIDE

8.6 ft Server Control Software Support Service

For R320e VMware model, please also order below support product for ft Server Control Software support.
Product Name / Description
PPSupportPack(1year support of ftSys for VMware vSphere6.0)
Software support service for ft Server Control Software for vSphere 6.0

8.7 Tower Conversion Kit

Product Name / Description
Tower Conversion Kit
23 inch height pedestal with front bezel

8.8 Dust Proof Filter

The server supports the dust resistant feature. Choose the following kit to install the system in dusty places.
Category
Filter

8.9 Boot Mode Setup Option

Product Name / Description
Boot Mode Setup Option (Legacy Mode)
Setup option to change the OS Boot Mode to Legacy mode
NOTE:

As the default settings at the factory, UEFI mode is set as OS Boot mode. Order NESV16-003 Boot
Mode Setup Option (Legacy Mode) for VMware vSphere 6.0 that requires Legacy Mode.

Before installing VMware ESXi on R320e, please be sure to set [XHCI mode] to [Auto] by referring to
the installation guide (VMware) for R320e.
NEC Corporation
–
NEC EXPRESS5800/R320e-M4 / VMware model
Product Name / Description
4U-FT Dust Filter
For R320e Dust Proof filter 10 pcs, attachment brackets for the
front bezel included
Revision 1.2, October 2017
Part Number
ULH1S-1377-004F
Part Number
N8843-005
Part Number
N8847-002
Part Number
NESV16-003
14