Table of Contents
Advertisement
Chapter 2 Useful Features
11.5
BIOS Settings for iSCSI Boot
When performing iSCSI Boot, set [BIOS Redirection Port] to "Disabled" (this is the factory setting).
Confirm the settings according to the following:
1. Turn on the power of this server and proceed with the POST process. Press <F2> to start SETUP after
the following message appears on the POST screen.
Press <F2> SETUP, ...(The message varies depending on the environment)
2. Select [Advanced]－[Serial Port Configuration] and press <Enter>.
3. Confirm that the [BIOS Redirection Port] is set to "Disabled".
142
Express5800/B120g-h Maintenance Guide
11. Advanced LAN Configuration
Advertisement
Table of Contents
