Operating The Speed Control; Optional Attachments - KitchenAid KSM180RP Series User Manual

USING THE STAND MIXER

OPERATING THE SPEED CONTROL

NOTE: The Stand Mixer may warm up during use� Under heavy loads with extended
mixing time, the top of the unit may become hot� This is normal�
Plug the Stand Mixer into a proper
electrical outlet� Always set speed
control lever on lowest speed to start,
1
then gradually increase speed to
avoid splashing ingredients� See the
"Speed control guide" chart�

OPTIONAL ATTACHMENTS

KitchenAid offers a wide range of optional attachments such as food grinders or
pasta makers� They may be attached to the Stand Mixer attachment power shaft,
as shown here�
To attach: Turn speed control
1
to "0"� Unplug Stand Mixer�
W11256121A.indd 15
Do not scrape the bowl while the
Stand Mixer is operating� The bowl
and beater are designed to provide
2
thorough mixing without frequent
scraping� Scraping the bowl once
or twice during mixing is usually
sufficient�
Loosen attachment knob by turning
2
it counterclockwise� Remove
attachment hub cover�
USING THE STAND MIXER | 15
14/06/2018 15:29:27