Eaton Halo HD4 Installation Instructions

IB518120ML
HD4, HD6 and HD7 Commercial Recessed Incandescent
Rough-In Installation Instructions
Junction Box
Junction Box Cover
Mounting Channels
(Halo HB26, HB50 accessories
or furnished by others)
Hanger Bracket
CAUTION: To avoid possible electrical shock, be sure that power supply is
turned off before installing or servicing this fixture.
Note: This fixture should be supported by main runners or other structure that is
capable of supporting fixture weight of 35 lbs.
To Install Rough-In Section
Step 1 Install fixture into ceiling cavity using 1/2" electrical conduit, 3/4"
channel, 1-1/2" channel (available through Halo or furnished by
others) or 1/8" x 1/2" bar stock as mounting rails (furnished by
others) by inserting them into hanger brackets at both ends of fixture
as shown.
Step 2 Secure mounting rails to support structures.
Step 3 Remove one of the junction box covers. Connect supply lead wires
to junction box lead wires marked "line" and "common" in
accordance with your local electrical code(s) or N.E.C.
WIRING DIAGRAM
BLACK BLACK
WHITE
BLUE
POWER
SUPPLY
WHITE WHITE
HALO
Socket Assembly
Socket Bracket
Wingnut
Fixture Stilt
Junction Box Plate
Plaster Ring
INSULATION
DETECTOR
LAMP
SOCKET
BLACK
®