Replacing The Rechargeable Battery - Philips FC8820 Manual

ENGLISH
22
Replacing the side brushes
Replace the side brushes after some time to ensure proper cleaning results.
Note: Always replace the side brushes when you notice signs of wear or
damage. We also recommend that you replace both side brushes at the same
time. You can order spare side brushes as a set under order number CP0107.
1 Make sure that the power switch is in 'off' position.
2 To replace the side brushes, grab the old side brushes by the bristles
and pull them off their shafts.
3 Push the new side brushes onto the shafts.

Replacing the rechargeable battery

Replace the rechargeable battery when you can no longer recharge it
or when it runs out of power quickly. You can order a new rechargeable
battery under order number CP0113 for FC8820 and order number
CP0112 for FC8810.
1 Let the robot run until the rechargeable battery is empty to make
sure that the rechargeable battery is completely discharged before
you remove it and dispose of it.
2 Push and slide the battery cavity cover off the robot and take out the
old rechargeable battery.
3 Place the new rechargeable battery in the battery cavity and slide the
battery cavity cover back onto the robot.