Philips FC8820 Manual page 20

ENGLISH
20
2 Pull up the handle of the dust container lid and lift the dust container
out of the dust container compartment.
Note: When you remove or reinsert the dust container, take care not to
damage the blades of the motor fan.
3 Carefully lift the lid off the dust container and take out the filter.
4 Shake the dust container over a dustbin to empty it. Clean the filter
and the inside of the dust container with a cloth or a toothbrush
with soft bristles. Also clean the suction opening in the bottom of the
dust container.
Caution: Do not clean the dust container and the filter with water or in
the dishwasher.
5 Put the filter back into the dust container. Then place the lid on the
dust container.
6 Put the dust container back into the dust container compartment
and put the top cover back onto the robot.
Caution: Always make sure the filter is present inside the dust container.
If you use the robot without the filter inside the dust container, the
motor will be damaged.