NEC Univerge SV9300 Series User Manual page 59

16. Enter the IP address of FTP/TFTP/
HTTPS server with digit keys.
Use for separator of IP address.
'*'For'.'
0. 0.
BK IP/URI
• After entering an IP address, press
or Soft key (OK).
The display goes back to the [Backup/
Restore] screen.
To enter the address (URI) of FTP/TFTP/
HTTPS, press Soft key (IP/URI) to switch the
display to the URI input screen.
• Press Soft Key (IP/URI)
• By using the Dial keys, enter the address
(URI) of the server where the files are
stored.
'*'For'.'
BK IP/URI
Please refer to "APPENDIX B INPUT
CHARACTERS" on page 102
enter the character.
• After entering addres (URI), press
Soft key (OK).
The display goes back to the [Backup/
Restore] screen.
The IP address input screen can be switched
to URI input screen by the Soft key (IP/URI).
'*'For'.'
0.
BK IP/URI
• Press Soft Key (IP/URI)
'*'For'.'
BK IP/URI
• Press Soft Key (IP/URI) again to go
back to the IP address input screen.
0. 0
Back OK
A
Back OK
for how to
or
0. 0. 0
Back OK
A
Back OK
17. Select "
Select one of the following operations.
• Highlight an item by using
,
• Press
Data Backup
1
Data Restore
2
↑
51
TERMINAL SETUP
Data Restore".
, and press
or Soft key (OK).
.
↓ Back OK