Advertisement
2. Restart Your Modem and Plug In Your Router
ta
~
Unplug your modem,
remove
and replace the backup battery
if
it uses one, and
then plug the modem back in. Use the Ethernet cable to connect the modem to
the blue
Internet
port on the router.
Note:
If your
Internet
connection does not require a modem, connect your main
Ethernet
cable to the blue
Internet
port on the
router.
Connect the router to a power source.
The
router's Power
LED(!) lights
green
when the router is ready.
3. Connect to the Internet
~
Make sure that the router's WiFi LED
(<•>)
is
lit
.
Look on the router label for the
preassigned WiFi network name (SSID) and network key (password).
Open the WiFi connection manager on your computer or other WiFi-enabled
device,
find the router's WiFi network name, and use the router's password to
connect.
Launch
a web browser. If the NETGEAR installation assistant
does
not display, visit
www.routerlogin.net.
If a
login
window displays, enter
admin
for
the
user name
and
password
for the
password.
Follow the onscreen
instructions.
The router's Internet LED
lights
~green
when the router
is
connected
to
the
Internet.
Advertisement
