Selecting System Settings - Bosch Kiox Original Operating Instructions

If the on-board computer is removed from the holder (5), the state of charge
that was last displayed for the battery is saved.

Selecting system settings

Fit the on-board computer in the holder and proceed as follows with the bi-
cycle stationary:
Go to the status page (use the < (10) button on the operating unit to get to
the first display) and call up the <Settings> with the select button (9).
You can use the – (11) and + (12) buttons to select the setting you want.
You can open the settings, as well as any additional sub-menus, using the se-
lect button (9). You can use the < button (10) to go back to the previous
menu from any settings menu.
The following settings can be changed in the <Sys settings>:
– <Brightness>
The brightness can be adjusted in ten increments from 0% to 100%. You
can set the required brightness using the </> buttons, and make your se-
lection using the +/– buttons. If the <Automatic> option is selected, the
brightness will adjust automatically according to the ambient light.
– <Time>
You can set the time using the </> buttons, and make your selection us-
ing the +/– buttons.
– <Date [DD.Mon.YYYY]>
This is where you can set the current date.
– <Time zone [Current value]>
This is where you can set the relevant time zone.
– <24h form>
This time format can be switched on or off.
– <Light backg.>
The light background can be switched on or off.
– <Imperial>
If this option is selected, Anglo-American (imperial) units are displayed
(e.g. miles rather than kilometers).
– <Language [Current language]>
Here you can choose the interface language from a choice of nine differ-
ent languages.
Bosch eBike Systems
English – 13
1 270 U20 Ken | (13.11.2018)