Inserting Batteries Into The Remote Control - Sony STR-ZA3100ES Help Manual

Help Guide
MULTI CHANNEL AV RECEIVER
STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES

Inserting batteries into the remote control

Insert two R03 (size AAA) batteries (supplied) into the remote control. Make sure that the + and - ends are in the correct
position when installing batteries.
Note
Do not leave the remote control in an extremely hot or humid place.
Do not use a new battery with an old one.
Do not mix manganese batteries with other kinds of batteries.
Do not expose the remote control sensor to direct sunlight or lights. Doing so may cause a malfunction.
If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
When the receiver no longer responds to the remote control, replace both of the batteries with new ones.
4-686-529-11(5) Copyright 2017 Sony Corporation
99