Tuning To A Station Directly (Direct Tuning) - Sony STR-ZA3100ES Help Manual

Help Guide
MULTI CHANNEL AV RECEIVER
STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES

Tuning to a station directly (Direct Tuning)

You can enter the frequency of a station directly.
Select [Listen] - [FM TUNER] or [AM TUNER] from the home menu.
1
If the Simple mode screen appears, switch to the Full mode screen by pressing OPTIONS and selecting [Full] in
[FM/AM Display] from the options menu.
Press / / /
2
Enter the frequency using
3
Press / to select a digit.
1.
2. Press / to change the digit.
Press .
4
Note
If the tuned frequency is invalid or out of range, [---.-- MHz] or [---- kHz] appears and then the screen returns to the current
frequency.
Make sure you have entered the right frequency. If not, repeat steps 3 and 4. If you still cannot tune to a station, the frequency
may not be in use in your area.
Hint
Adjust the direction of the AM loop antenna (aerial) for optimum reception upon tuning to an AM station.
The tuning scale for direct tuning is shown below:
FM: 100 kHz
AM: 10 kHz (*)
* The AM tuning scale can be changed. For details, see
Related Topic
Changing the AM tuning scale
to select the Frequency indication and then press
/ / / .
4-686-529-11(5) Copyright 2017 Sony Corporation
"Changing the AM tuning scale."
125
.